Products and ApplicationsCurrent location: Home > Products and Applications > Syringe Specification Document
- Specification document
- Research and design for multi-channel injection pumps
Syringes come in various sizes ranging from 250 µ L to 10mL
There are multiple materials and styles to choose from
Suitable for analysis, biotechnology, and diagnostic applications
Inquiry
Specification
Physics |
Chemical aspects |
Environmental aspects |
| Length 107.5mm (60mm stroke) |
Wetting materials, borosilicate glass, PCTFE, PTFE (or UHMW-PE) |
Operating temperature: 50°F to 104°F (10°C to 40°C) |
| Length: 64.5mm (30mm stroke) |
Instructions for using the syringe |
Storage temperature: 13°F to 185°F (-25℃ to 85℃) |
|
Thread type |
Laboratory-grade silicone lubricant |
The relative humidity is as high as 100% |
structural specifications:
Specification Model |
itinerary |
capacity |
inner diameter size |
outer diameter dimension |
glass tube material |
Piston material |
Joint specifications |
Suction and discharge accuracy |
| DC-X25061 | 60 | 25ml | 23.04mm | 27.2mm |
high borosilicate |
UHMWPE | 1/4-28UNF | 0.5% |
|
DC-X00061 |
60 | 10ml | 14.56mm | 18mm |
high borosilicate |
UHMWPE |
1/4-28UNF |
0.5% |
|
DC-500031 |
30 | 5ml | 14.56mm | 18mm |
high borosilicate |
UHMWPE |
1/4-28UNF |
0.5% |
|
DC-500061 |
60 | 5ml | 10.3mm | 13.8mm |
high borosilicate |
UHMWPE |
1/4-28UNF |
0.5% |
|
DC-100061 |
60 | 1ml | 4.6mm | 8mm |
high borosilicate |
UHMWPE |
1/4-28UNF |
0.5% |
|
DC-100031 |
30 | 1ml | 6.51mm | 10.2mm |
high borosilicate |
UHMWPE |
1/4-28UNF |
0.5% |
|
DC-250031 |
30 | 2.5ml | 10.3mm | 13.8 |
high borosilicate |
UHMWPE |
1/4-28UNF |
0.5% |
|
DC-250061 |
60 | 2.5ml | 7.286mm | 11mm |
high borosilicate |
UHMWPE |
1/4-28UNF |
0.5% |
|
DC-050031 |
30 | 500ul | 4.6mm | 8mm |
high borosilicate |
UHMWPE |
1/4-28UNF |
0.5% |
|
DC-050061 |
60 | 500ul | 3.26mm | 8mm |
high borosilicate |
UHMWPE |
1/4-28UNF |
0.5% |
|
DC-025031 |
30 | 250ul | 3.26mm | 8mm |
high borosilicate |
UHMWPE |
1/4-28UNF |
0.5% |
|
DC-025061 |
60 | 250ul | 2.30 | 8mm |
high borosilicate |
UHMWPE |
1/4-28UNF |
0.5% |
Cleaning and maintenance:
1. Do not use the syringe in a dry condition.
2. After use, thoroughly rinse the syringe with purified water.
3. If the plunger moves with difficulty inside the syringe barrel, remove the plunger head, apply purified water on the seal, or apply silicone oil on the black seal, then reinstall the plunger head. If the plunger is removed from the syringe barrel, wipe it with alcohol before replacement.
4. Replace the syringe seal regularly to ensure optimal performance. The frequency will depend on the usage frequency, the liquid flowing through the system, the syringe size, and the maintenance condition of the instrument
Related Products
Pre: Robotic Arm Module
Next: Glass tube
